pdf Super Ion Air Knife Download Product PDF

pdf Super Ion Air Knife  Download Installation & Maintenance Sheet  

Super Ion Air Knife 



superionairknife Super Ion Air KnifePowerful static eliminator prevents jamming, tearing, shocks and dust up to 20 feet (6.1m) away!
Uses The Super Air Knife

  • Low Air Consumption!
  • Surprisingly Quiet!
  • Uniform Airl ow!
  • End and Bottom Air Inlets!

Remove Dust prior to painting car bumpers
Bumpers, car bodies and fascia are cleaned
of dust and fibers prior to painting.

 

What Is The Super Ion Air Knife?
EXAIR's Super Ion Air Knife removes static electricity from plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. The laminar sheet of airsweeps surfaces clean of static, particulate, dust and dirt. Production speeds, product quality, and surface cleanliness can improve dramatically.

Why The Super Ion Air Knife?

The Super Ion Air Knife floods an area or surface with static eliminating ions - up to 20 feet (6.1m) away. A uniform airflow across its length will not cause misalignments to critical surfaces such as webs. Force can be adjusted from a "blast" to a "breeze". The Super Ion Air Knife is electrically powered, is shockless and has no

48 inch Super Ion Air Knife cleans paper surface and removes static
The 48" Super Ion Air Knife neutralizes the static
electricity and cleans the surface of the paper

moving parts. It also requires less than 2 SCFM of compressed air per foot of length at 5 PSIG (227 SLPM per 300mm of length at 0.3 BAR). Sound level is surprisingly quiet at 50 dBA for most applications.

Supre Ion Air Knife eliminates static from labels.

The Super Ion Air Knife eliminates the static charge on labels being applied to PET soft
drink bottle

Applications

Advantages

  • Web cleaning
  • Molding machinery
  • Sheeters and trimmers
  • Cleaning parts
  • Pre-paint dust removal
  • Shrink wrappers
  • Package cleaning
  • Printing equipment
  • Bag opening/fill operations
  • Low air consumption
  • Uniform airflow across entire length
  • Quiet
  • Effective up to 20' (6.1m)
  • Shockless, non-radioactive
  • Compact, rugged, easy to install
  • Variable force and flow
  • Low maintenance
  • Unlimited system lengths of uninterrupted airflow

 

Super Ion Air Knife Specifications


st5 Super Ion Air KnifeThe Super Ion Air Knife is available in standard lengths of 3", 6", 9", 12", 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96" and 108" (76, 152, 229, 305, 457, 610, 762, 914, 1067, 1219, 1372, 1524, 1829, 2134, 2438 and 2743mm).Special lengths and unlimited system lengths are available.A 5' (1.52m) shielded power cable with ground and assembled bayonet connector are included.
EXAIR Model 7901, 7907, 7940 or 7941 Power Supply (5kV) is required for bar operation. Power supplies are equipped with a 6' (1.83m) power cord, lighted power switch and (2) or (4) high voltage outlets.
Certii cations: Ionizing Bars are UL Component Recognized to U.S. and Canadian safety standards. Power supplies are UL Listed to U.S. and Canadian safety standards, and are CE and RoHS compliant.
Compressed Air: 1/4 NPT inlets are provided on each end and the bottom.
Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply.
Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited).
Do not use near flammable materials or gases.
Materials of Construction:
           Super Air Knife: Aluminum
           Ionizing Bar Channel: Aluminum
           Plastic Parts: UL rated 94 HB
           Emitters: Stainless Steel
Maximum Ambient Temperature: 165°F (74°C)
Shims: Thicker shims can be installed easily if additional hard-hitting velocity is required.

Dimensions

siakDim Super Ion Air Knife
 

Performance

siakpef Super Ion Air Knife
Eliminate Contaminants before packaging
A small Model 111103 3" (76mm) Super Ion Air Knife System
eliminates contaminants from syringes prior to packaging.


Enhanced Performance and Reliability


Ionizing bars are very ineffective without an air delivery system. When used by itself, a bar must be mounted within two inches of the charged surface to fully neutralize it. This close mounting is impossible when the static is generated in confined areas of a machine. Ion coverage is minimal on oddly configured parts or when high production speeds are involved.
The right type of air delivery is critical. Blowers produce an uneven, turbulent air stream that can cause the positive and negative ions to recombine before hitting the charged material. They are large, suffer mechanical wear and provide limited airflow control. The compact Super Ion Air Knife uses a small amount of compressed air to produce a balanced, laminar sheet of air to carry the ions to the charged surface, even when it is far away. Flow and force are easily controlled and there are no moving parts to wear out.

Super Ion Air Knife kit
Super Ion Air Knife Kits include a Super Ion
Air Knife, Model 7901 Power Supply, shim
set, filter separator and pressure regulator

Added Features

  • Compressed air inlets (1/4 NPT) are provided on each end and the bottom of the Super Ion Air Knife. Multiple Super Ion Air Knives can be mounted end-to-end without an air gap.
  • Shims can be installed easily if additional hard-hitting velocity is required.
  • Primary air does not impact any surface of the Super Ion Air Knife which keeps the sound level low.
  • Insertion molded emitter points eliminate potential dirt accumulation that could degrade performance or eventually short the ionizing bar.
  • Emitter points are sharp, durable stainless steel.
  • The power cable is shielded and has integral grounding. The threaded bayonet connector is fully assembled and ready to use.
  • Super Ion Air Knife Kits which include all components necessary for operation are available.

Universal Air Knife Mounting System Provide precise positioning for your air knife

Universal Air Knife Mounting SystemThe Model 9060 Universal Air Knife Mounting System is used to provide secure, precise positioning for any of the EXAIR Air Knives. It can be mounted on either the top or bottom of most Air Knives (Super Air Knife, Standard Air Knife and Full-Flow Air Knife). The Universal Air Knife Mounting System has a durable, stainless steel construction that is suitable for a variety of industrial applications.

The mounting system can also be used with EXAIR Static Eliminators. For the Super Ion Air Knife, it can be mounted on the top. Bottom mounting is possible on Super Ion Air Knives that are 18” (457mm) or longer. For the Standard Ion Air Knife, it can be top mounted on any length. Bottom mounting is possible on Standard Ion Air Knives that are 9” (229mm) or longer.

The Universal Air Knife Mounting System can be articulated into any position and provides a maximum extension of 30” (762mm). A 17/32” (14mm) diameter hole is required for mounting. Alternatively, the bolt can be threaded directly into a 1/2”-13 tapped hole. For any style air knife that is 24” (610mm) or longer, it is recommended that (2) Universal Air Knife Mounting Systems be used to obtain a secure mounting.


Electronic Flow Control (EFC)

Electronic Flow Control (EFC)

EXAIR's EFC is an electronic flow control that dramatically reduces compressed air costs by turning off the compressed air when no part is present. This minimizes compressed air use for blow off, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present. Visit the EFC page for more information.


How the Super Ion Air Knife Works

How the Super Ion Air Knife Works Diagram

Compressed air flows through an inlet (1) into the plenum chamber of the Super Ion Air Knife. The flow is directed to a precise, slotted orifice. As the primary airflow exits, it creates a uniform sheet of air across the entire length that immediately pulls in surrounding room air (2). An electrically powered ionizing bar (3) fills the curtain of air with positive and negative charges. The airstream delivers these static eliminating ions to the product surface (4) where it is instantly neutralized and cleaned of dust and other particulates.

Models

BSP Threads Available - Contact Us.
stmodel Super Ion Air Knife

Accessories and Components


stacc Super Ion Air Knife


UL ListedCE Logo EXAIR Model 7901 or 7907 Power Supply (5 kV) is required for operation.

 For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7901 (115V) or 7907 (230V). Power Supplies are UL Listed to U.S. and Canadian safety standards. (Also available with 4 Outlets - Model 7940 or Model 7941.)
Ionizing bars are UL Component Recognized to U.S. and Canadian Standards. Canadian/US UL Recognized