EXAIR Videos

airknifevideo Vivek Engineers - Product Videos

Air Knives

Super Air Knives are aerodynamically engineered and tested to produce an efficient, uniform and high velocity stream of air. Air Knives are designed for 24/7 use, have smooth edges and seams for easier cleaning, can be precisely adjusted without tools for faster change-over’s and are custom sized for your application. Super Air knife dramatically reduce compressed air and noise levels as compared to other blow-off products. The sound level is surprisingly quite at 69 dBA even at high pressure of 80 PSIG (5.5 BAR). It produces air amplification ratios (entrained air to compressed air) of 40:1.Meets OSHA maximum dead-ended pressure & noise requirements

 airnozzlesvideo Vivek Engineers - Product Videos

Air Nozzles and safety Air Gun

EXAIR’s Safety Air Gun uses an engineered Air Nozzle that provides superior performance by entraining large volumes of surrounding air. Safe operation is assured along with low air consumption and noise levels.Four Safety Air Guns. The Soft Grip and Heavy Duty Safety Air Guns are available with a variety of air nozzles (listed in order of force). Those with stainless steel air nozzles provide higher mechanical wear while withstanding corrosion and high temperatures. Air consumption, force and sound level are shown for all models.

Static Elimination Video

Static Eliminators

A new technology solution to the old problem of static build-up. EXAIR Static Eliminators maximize ionized airflow while minimizing compressed air consumption. A small amount of compressed air is used to entrain a high volume of surrounding air. This combined stream is ionized by an emitter point (or points) and delivered to the charged surface. Static is neutralized from distances up to 20 feet (6.1m) away. Thus, EXAIR Static Eliminators work effectively in spite of obstructions, three dimensional configurations, web "rippling", etc.

Vacuum Generator Demonstration Video

Porous vs. Non-Pourous E-Vac Vacuum Generators

E-Vac compressed air powered vacuum pumps provide instantaneous response and are most commonly used for pick and place operations. These single stage vacuum pumps are a low cost venturi available in a variety of sizes and flows along with a selection of suction cups suitable for a wide range of applications. Models for porous and non-porous applications are available. This video can help to select the appropriate style for your applicaiton.


Drum Vac Two Way Action

Reversible Drum Vac

EXAIR's compressed air operated Reversible Drum Vac System attaches quickly to any closed head 30 or 55 gallon (45 imperial gallon/205 liter) drum. Its high powered vacuum fills the drum in less than two minutes. With the simple turn of a knob, the same stainless steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.


Chip Vac Industrial Vacuum Demo Video

Chip Vac

EXAIR's Chip Vac picks up dry or wet chips and delivers them directly to an ordinary 55 gallon open-top (45 imperial gallon/205 liter) drum. The Chip Vac is used to clean chips from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment. The powerful suction is ideal for fast and efficient cleaning.


Cabinet Cooler Video

Cabinet Cooler Systems

EXAIR Cabinet Coolers are a low cost, reliable way to cool and purge electronic control panels. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.


Chip Trapper Video

Chip Trapper

The new Chip Trapper (patent pending) offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids.

Cold Gun Video

Cold Gun Aircoolant System

EXAIR’s Cold Gun makes it possible to replace messy mist systems and improve dry machining operations using clean, cold air! It’s a new solution to an old problem. Heat build up on dry machining operations reduces tool life and machining rates. The Cold Gun Aircoolant System produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used.

Cold Gun Video

Line Vac Air Conveyors

EXAIR's compressed air operated Line Vac connects to standard hose or tube to create a powerful in-line conveyor. The compact design features large throat diameters for maximum throughput capacity. Eleven sizes in aluminum and ten sizes in stainless steel are suited to a wide variety of transfer applications.