pdf Compressed Air Accessories for EXAIR Products Download Product PDF

pdf Compressed Air Accessories for EXAIR Products  Download Installation Sheet  

Accessories

EXAIR offers a complete line of accessories.


Valves

Manual Brass Valvesfootpedalvalve Compressed Air Accessories for EXAIR Products

Model Description
9012 Manual Valve, 1/4 NPT
900340 Manual Valve, 3/8 NPT
900343 Manual Valve, 1/2 NPT
900743 Manual Valve, 3/4 NPT
900346 Manual Valve, 1 NPT
900744 Manual Valve, 1 - 1/4 NPT
9040 Foot Valve, 1/4 NPT
 

Solenoid Valves

solenoidvalave Compressed Air Accessories for EXAIR Products

 

 



Solenoid Valves are available in a variety of flow rates and voltages. All models are UL Listed and are CE and RoHS compliant.

Model # Description
9020
Solenoid Valve, 120V, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM)
9018
NEMA 4-4X Solenoid Valve, 110V-120V, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM)
9021
Solenoid Valve, 200-240V, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM)
9024
NEMA 4-4X Solenoid Valve, 240V, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM)
9059
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 3/4 NPT, 200 SCFM (5,664 SLPM)
9031
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM)
9034
NEMA 4-4X Solenoid Valve, 120V, 50/60Hz, 1/2 NPT, 100 SCFM (2,832 SLPM)
9035
NEMA 4-4X Solenoid Valve, 240V, 50/60Hz, 1/2 NPT, 100 SCFM (2,832 SLPM)
9058
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 1/2 NPT, 100 SCFM (2,832 SLPM)
9036
NEMA 4-4X Solenoid Valve, 120V, 50/60Hz, 3/4 NPT, 200 SCFM (5,664 SLPM)
9037
NEMA 4-4X Solenoid Valve, 240V, 50/60Hz, 3/4 NPT, 200 SCFM (5,664 SLPM)
9065
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 1 NPT, 350 SCFM (9,911 SLPM)

Thermostat

Thermostat

The adjustable thermostat isfactory set at 95ºF (35ºC). It will normally hold ±2ºF (1ºC) of the desired temperature setting. It is rated 24V-240V AC or DC, 50/60Hz and is UL Recognized, CSA Certifi ed.

Model Description
9017 Thermostat
CompliantCompliant

Magnetic Base

Magnetic bases are suited to applications where frequent movement of the air product is required. The powerful magnet permits horizontal or vertical mounting. A shutoff valve is provided that can be used to infinitely vary the force and flow.

Model Description
9029
One Outlet Swivel Magnetic Base with Shutoff Valve
9042
One Outlet Magnetic Base with Shutoff Valve
9043
Two Outlet Magnetic Base with Shutoff Valve
 
One Outlet Swivel Magnetic BaseOne Outlet Magnetic BaseTwo Outlet Magnetic Base

 

Swivel Fittings

EXAIR's Swivel Fittings make it easy to adjust the position of the Air Nozzles and Jets. The Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 and 316 Stainless Steel.

Swivel Fittings for Air Nozzles

 

Model # Description
9201
M4 x 0.5mm female x 1/8 MNPT Swivel Fitting, 316 SS
9202
M5 x 0.5mm female x 1/8 MNPT Swivel Fitting, 316 SS
9203
M6 x 0.75mm female x 1/8 MNPT Swivel Fitting, 316 SS
9052
1/8 NPT Swivel Fitting, 303 SS
9053
1/4 NPT Swivel Fitting, 303 SS
9068
3/8 NPT Swivel Fitting, 303 SS
9069
1/2 NPT Swivel Fitting, 303 SS
9023
3/4 NPT Swivel Fitting, 303 SS
9204
1 MNPT x 1 FNPT, 303 SS

 


Drum Dolly

Drum Dolly

The Model 9041 55 Gallon Drum Dolly has a 900 lb capacity and works with our Chip Vac and Reversible Drum Vac .The Model 9041 Drum Dolly makes it easy to move the Chip Vac or Drum Vac from one
work area to another.

  • Easy to roll, heavy-duty dolly makes it easy to transport 55 gallon drums
  • 3" diameter ball bearing swivel casters that resist oil, water and impact
  • All welded steel construction, zinc plated nuts and bolts
Model Capacity (lbs) Drum Size (gal.) Inside Diameter (in.) Ship Weight (lbs.)
9041 900 55 23-3/4 28

Air Hose

AirHose Compressed Air Accessories for EXAIR Products
Model Description
Compressed air hose is made of reinforced synthetic rubber to assure long life and protection against ozone, weathering, and temperatures up to 158ºF (70ºC). Hose lengths are 10', 20', 30', 40' and 50'. Indicate the length with a dash. Example: A Model 900061-30 is 3/8" ID Hose x 30' long.
900061- Compressed Air Hose, 1/4 MNPT x 1/4 MNPT (3/8" ID Hose)
901179 Compressed Air Hose, 1/2 MNPT x 1/2 MNPT (1/2" ID Hose)
 
c-hose Compressed Air Accessories for EXAIR Products
Conveying Hose
Hose lengths are 10', 20', 30', 40' and 50' (3.05m, 6.10m, 9.14m, 12.19m and 15.24m). Select the hose model number (diameter) and indicate the length with a dash. Example: A Model 6931-20 is 1" ID Hose x 20' long.
Model # Description   Model # Description   Model # Description
6928- Hose 3/8" ID 6931- Hose 1" ID 6934- Hose 2" ID
6929- Hose 1/2" ID 6932- Hose 1-1/4" ID 6935- Hose 2-1/2" ID
6930- Hose 3/4" ID 6933- Hose 1-1/2" ID 6936- Hose 3" ID
Coiled Compressed Air Hose
12 Foot (3.66m) Coiled Hoses
Model # Description   Model # Description   Model # Description
900106 1/8 NPT x 1/4" ID Coiled Hose With Swivel 900750 1/4 NPT x 3/8" ID Coiled Hose With Swivel 900751 3/8 NPT x 3/8"Coiled Hose With Swivel

60 Gallon Receiver Tank

60 Gallon Receiver TankSome applications require an intermittent demand for a high volume of compressed air.This can cause fl uctuations in pressure and volume throughout the compressed air system with some points being “starved” for compressed air. EXAIR’s Model 9500-60 60 Gallon Receiver Tank can be installed near the point of high demand so there is an additional supply of compressed air available for a short duration. the time between the high volume demand occurrences should be long enough so the compressor has enough time to replenish the EXAIR 60 Gallon Receiver Tank.

The 60 gallon (227 liter) vertical steel tank with mounting feet saves floor space and meets the American Society of Mechanical Engineers (ASME) pressure vessel code. (It is not ASME rated for vacuum.) A drain valve is provided for placementat the bottom of the tank to discharge liquid and contaminants.
A user supplied check valve installed upstream of the receiver tank will maintain the tank at maximum pressure so upstream uses of compressed air do not deplete the tank. A user supplied needle valve can regulate the refi lling of the Receiver Tank, eff ectively reducing the large intermittent air requirement into a smaller average demand.
60gallonreceivertank Compressed Air Accessories for EXAIR Products
Receiver Tank
Model # Description
9500-60 60 Gallon Receiver Tank
  • Pressure Tank has a primer finish
  • No plugs are included for open ports.
    User must supply pressure rated plugs and pressure relief valve.
  • Weight is 165 lbs. (75 kg)
  • Temperature rating is -20° to 450°F( -29 to 232°C)
  • Please consult your local code requirements prior to installation
  • Tank maximum pressure is 200 PSIG(13.8 BAR)

Compressed Air Fittings

Fitting 9944Fitting 9951Fitting 9871Fitting Model 9959Fitting Model 900435

Hex Nipple
Model # Material Thread Size
9890 Brass 1/8 NPTM x 1/8 NPTM
9944 Brass 1/4 NPTM x 1/4 NPTM
9759 Brass 3/8 NPTM x 3/8 NPTM
9760 Brass 1/2 NPTM x 1/2 NPTM
9761 Brass 3/4 NPTM x 3/4 NPTM
9958 304SS 1/8 NPTM x 1/8 NPTM
9959 304SS 1/4 NPTM x 1/4 NPTM
9960 304SS 3/8 NPTM x 3/8 NPTM
9961 304SS 1/2 NPTM x 1/2 NPTM
Close Nipple
Model # Material Thread Size
9551 Brass 1/4 NPTM x 1/4 NPTM
9752 Brass 3/8 NPTM x 3/8 NPTM
900745 Brass 1/2 NPTM x 1/2 NPTM
900559 Brass 3/4 NPTM x 3/4 NPTM
900309 NP Brass 1/8 NPTM x 1/8 NPTM
900084 NP Brass 1/4 NPTM x 1/4 NPTM
900435 NP Brass 3/8 NPTM x 3/8 NPTM
900436 NP Brass 1/2 NPTM x 1/2 NPTM
900409 316SS 1/8 NPTM x 1/8 NPTM
900160 316SS 1/4 NPTM x 1/4 NPTM
900505 316SS 3/8 NPTM x 3/8 NPTM
900506 316SS 1/2 NPTM x 1/2 NPTM
Coupler
Model # Material Thread Size
900453 NP Brass 1/8 NPTF x 1/8 NPTF
9871 Brass 1/4 NPTF x 1/4 NPTF
NPTM = NPT Male, NPTF = NPT Female, NP = Nickel Plated

 

Fitting 9546Fitting 900005Fitting 9555Fitting 900735Fitting 900069

Reducer
Model # Material Thread Size
900405 Brass 1/4 NPTM x 1/8 NPTF
900105 Brass 1/4 NPTF x 1/8 NPTM
9553 Brass 3/8 NPTM x 1/4 NPTM
9897 Brass 1/2 NPTM x 3/8 NPTM
900736 Brass 1/4 NPTM x 1/4 NPTM
900622 Brass 1/2 NPTM x 1/4 NPTF
900985 Brass 1/2 FNPT x 3/8 MNPT
Tee
Model # Material Thread Size
900005 Brass 1/4 NPTF x 1/4 NPTF x 1/4 NPTM
9851 Brass 1/4 NPTM x 1/4 NPTM x 1/4 NPTM
9971 Brass 3/8 NPTF x 1/4 NPTF x 3/8 NPTM
9896 Brass 3/8 NPTF x 3/8 NPTF x 3/8 NPTF
900621 Brass 1/2 NPTF x 1/2 NPTF x 1/2 NPTF
900734 Brass 1/2 NPTF x 1/4 NPTF x 1/2 NPTF
Elbow
Model # Material Thread Size
7674 Brass 1/8 NPTM x 1/8 NPTF 45°
9555 Brass 1/4 NPTM x 1/4 NPTF 90°
9895 Brass 3/8 NPTM x 3/8 NPTF 90°
900073 Brass 1/4 NPTM x 3/8 Tube 90°
Cross
Model # Material Thread Size
900735 Brass 1/2 NPTF x 1/2 NPTF
Bulkhead Fitting
Model # Material Thread Size
900069 Brass 3/4 NPTM x 1/4 NPTF
NPTM = NPT Male, NPTF = NPT Female, NP = Nickel Plated

Mufflers and Filters
Muffler

EXAIR Silencing Mufflers help to reduce work area noise produced by air exhausting from cylinders, valves and other air powered equipment. Per OSHA standard 1910.95, a worker must not be exposed to sound levels above 90 dBA for any eight hour shift of a 40 hour work week. Silencing Mufflers help plants meet this OSHA requirement by reducing the sound to safe levels below 90 dBA. They also eliminate harmful dead ended pressures. Each style of Silencing Muffler shown has a high airflow capacity, with low back pressure. Popular NPT sizes are ideal for new and existing installations.

EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products.


Stay Set Hose

Stay Set Hoses

For applications where frequent repositioning of the air product is required, the Flexible Stay Set Hoses™ are ideal. Simply mount the hose in close proximity to the application and bend it. Since the hose has “memory”, it will not creep or bend. It will always keep the aim until physically moved to the next position and will withstand temperatures of up to 158ºF (70ºC).(1/4 male NPT fi tting on one end, 1/8 female NPT on the other)

staysethosesmale Compressed Air Accessories for EXAIR Productsstsyhose Compressed Air Accessories for EXAIR Products

 


Installation and Maintenance Sheets

Model 9500-60 Receiver Tank