snubbers Vivek Engineers - Shock Absorbers(Snubbers)Shock Absorbers(Snubbers)

At the end of the stroke of your mechanism If ontrolled deceleration is required,then the Airpot snubber configuration is particularly useful. It performs push damping only and the push rod is not connected to the work. Airpot snubbers provide a wide range of low to moderate energy applications in which accurate control of impact, damping or shock absorption is required. The devices accomplish this by using the piston to force ambient air through an adjustable orifice at a controlled rate to dissipate kinetic energy and reduce impact, noise and wear.
Airpot’s snubbers are designed in a special way which provides unparalleled energy dissipation accuracy by eliminating friction from  their working elements. The materials which are used have built-in lubricity, high strength-to-weight ratio, excellent stability under temperature/humidity extremes, close coefficients of thermal expansion, and non-deteriorating performance due to age or non-use. The basic parts are a graphitized carbon piston, precision ground to millionths of an inch TIR inside an annealed, borosilicate glass cylinder with a precision fire-polished bore. Airpot snubbers are available in 4 bore sizes ranging from 0.627” to 1.75” and strokes lengths of 1.1” to 2.3”.

features of Snubber:

  • Not connected to the damped mass they are working with
  • Used in accurate end of stroke and shock absorbtion applications
  • Primary function is energy dissipation
  • One way only,(damping in compression)
  • Low force return spring for self resetting
Bore Size: .627"
(15.93 mm)
Bore Size: .945"
(24 mm)
Bore Size: 1.281"
(32.53 mm)
Bore Size: 1.750"
(44.4 mm)
 BORE (inches) 0.627   0.945 1.281 1.75
 STROKE(inches) 1.1    1.3 2.3 2.3
ENERGY CAPACITY (FT-LBS) 0-.3    0-.75 0-3 0-7
SPRING FORCE EXTENDED (LBS) 0.16    0.13 0.25 0.25
SPRING FORCE RETRACTED (LBS) 0.28    0.27 0.5 0.5
PUSH ROD RESET TIME -VALVE FULLY OPEN 30ms   60ms 70ms 161ms
PUSH ROD RESET TIME -VALVE FULLY CLOSED 50ms    90ms 150ms 430ms
FRICTION COEFFICIENT (approx.) Static and dynamic 0.2 0.2 0.2 0.2
PISTON FRICTION (without side load): grams <1  <1  <4  <8
OPERATING TEMPERATURE RANGE *NOTE: If operating at temperatures over 70 degrees C (158 degrees F) please advise factory - 55C to +150C   - 55C to +150C  - 55C to +75C - 55C to +75C